Spanish Hemstitch Foot for Most Husqvarna Viking Sewing Machines

$53.95

Spanish Hemstitch Foot

Spanish Hemstitching is a delightful addition to any project. It is used to join two finished edges. It works well to attach borders, edging to a skirt or curtain or to piece fabric, for example to achieve the width needed for a tablecloth. For the above models, the Spanish Hemstitch Distance Plate snaps on to the standard needle plate.

Use:

  1. Snap the Distance Plate onto the needle plate by placing the little prongs into the holes in the plate. Be sure that the plate doesn’t cover the feed teeth. Snap on the Spanish Hemstitch Foot.
  2. Thread with a decorative thread on top and in the bobbin.
  3. Select a zigzag, three step zig zag. Adjust stitch width to make sure that the needle catches the fabric edges. Note: Avoid using stitches with too much side motion and stitches with too much motion forward and back.
  4. You need to have a finished edge. If necessary, press under a 3/8” (1 cm) seam allowance on the fabric edges that will be stitched together.
  5. Place the pressed edge of the pieces on each side of the Distance Plate.
  6. Lower the presser foot.
  7. Start with a long thread tail of both top and bobbin thread. Hold these threads as you begin sewing until the needle catches on the fabric. Because of the nature of the stitching, it will stitch on “air” for several stitches before it goes over and catches the fabric edge. Once the needle has caught the fabric, you can let go of the threads. Sew, holding the edges gently together in front of the foot.
  8. Optional: Place a decorative thread in the groove of the Distance Plate.

Available on backorder

Description

Spanish Hemstitch Foot

Spanish Hemstitching is a delightful addition to any project. It is used to join two finished edges. It works well to attach borders, edging to a skirt or curtain or to piece fabric, for example to achieve the width needed for a tablecloth. For the above models, the Spanish Hemstitch Distance Plate snaps on to the standard needle plate.

Use:

  1. Snap the Distance Plate onto the needle plate by placing the little prongs into the holes in the plate. Be sure that the plate doesn’t cover the feed teeth. Snap on the Spanish Hemstitch Foot.
  2. Thread with a decorative thread on top and in the bobbin.
  3. Select a zigzag, three step zig zag. Adjust stitch width to make sure that the needle catches the fabric edges. Note: Avoid using stitches with too much side motion and stitches with too much motion forward and back.
  4. You need to have a finished edge. If necessary, press under a 3/8” (1 cm) seam allowance on the fabric edges that will be stitched together.
  5. Place the pressed edge of the pieces on each side of the Distance Plate.
  6. Lower the presser foot.
  7. Start with a long thread tail of both top and bobbin thread. Hold these threads as you begin sewing until the needle catches on the fabric. Because of the nature of the stitching, it will stitch on “air” for several stitches before it goes over and catches the fabric edge. Once the needle has caught the fabric, you can let go of the threads. Sew, holding the edges gently together in front of the foot.
  8. Optional: Place a decorative thread in the groove of the Distance Plate.

Fits:

Husqvarna Viking

  • 183
  • 200
  • 203
  • 415
  • 425
  • 435
  • 435
  • 500
  • 500
  • 530
  • 535
  • 540
  • 545
  • 550
  • 605
  • 735
  • 755 Quilt
  • 775
  • 950 E
  • Angelica
  • Brilliance 75Q
  • Designer Brilliance 80
  • Designer Diamond
  • Designer Epic 980Q
  • Designer I
  • Designer I
  • Designer I ESS
  • Designer I USB
  • Designer II
  • Designer Jade 35
  • Designer Ruby Royale
  • Designer SE
  • Designer SE
  • Designer SE Limited Edition
  • Designer Sapphire 85
  • Designer Topaz 20
  • Designer Topaz 30
  • Designer Topaz 50
  • Eden Rose 250C
  • Emerald
  • Facette 500/400
  • Freesia 445
  • II
  • Interlude 445
  • Iris
  • Lily 555
  • Lisa
  • Opal 650
  • Opal 670
  • Opal 690Q
  • Platinum 715
  • Platinum 730
  • Platinum 750 Quilt
  • Platinum 770
  • Platinum 955 E
  • Platinum Plus
  • Quilt Designer
  • Quilt Designer
  • Quilt Designer II
  • Quilt Designer II
  • Rose 600
  • Sapphire 830
  • Sapphire 835
  • Sapphire 850
  • Sapphire 855
  • Sapphire 870
  • Sapphire 875Q
  • Sapphire 930
  • Sapphire 960Q
  • Sapphire 965Q
  • Scandinavia 300
  • Tribute 140C
  • Tribute 145C
  • Victoria
  • Viva

Part Number:

  • 4130648-45
  • 413064845

Additional information

Weight 0.1 lbs
Dimensions 1 × 1 × 1 in
Stocking Location

Millard Sewing Center

Brand

Husqvarna Viking

Reviews

There are no reviews yet.

Be the first to review “Spanish Hemstitch Foot for Most Husqvarna Viking Sewing Machines”

Your email address will not be published. Required fields are marked *