Stippling Foot, Open Toe for Most Husqvarna Viking Sewing Machines

Stippling Open Toe

The Open Toe Stippling Foot (floating) is ideal for stitching free motion on print fabrics, or when stippling around pieced or embroidered designs. It gives clear vision for free motion sewing.

Use:

1. Loosen the presser foot ankle screw completely and remove the ankle. Place the Open Toe Stippling Foot (Floating) around the presser bar; attach it with the screw.
2. Thread your machine.
3. Select a straight stitch.
4. Set your sewing machine to Free Motion Floating mode and lower the feed dogs (some machines do this automatically). Note: When the feed dogs are dropped, the fabric is no longer fed by the machine. You must move the fabric.
5. Bring the bobbin thread to the top by taking one stitch. Hold onto both threads and sew a few stitches in place to begin.
6. Maintain a consistent speed and move the fabric in a smooth motion. You are creating the length of the stitch as you move the fabric.
7. When sewing in Free Motion Floating mode at a low speed the presser foot will raise and lower with each stitch to hold the fabric on the stitch plate while the stitch is being performed. At a higher speed, the presser foot floats over the fabric while sewing

Fits:

Husqvarna Viking

• Brilliance 75Q
• Designer Brilliance 80
• Designer Diamond
• Designer Diamond Royale
• Designer Epic 980Q
• Designer Epic II
• Designer I
• Designer I
• Designer I ESS
• Designer I USB
• Designer II
• Designer Ruby Royale
• Designer SE
• Designer SE
• Designer SE Limited Edition
• Designer Sapphire 85
• Designer Topaz 20
• Designer Topaz 30
• Designer Topaz 50
• Epic 95Q
• II
• Opal 670
• Opal 690Q
• Quilt Designer
• Quilt Designer
• Quilt Designer II
• Quilt Designer II
• Sapphire 830
• Sapphire 835
• Sapphire 850
• Sapphire 855
• Sapphire 870
• Sapphire 875Q
• Sapphire 930
• Sapphire 960Q
• Sapphire 965Q
• Tribute 145C

Part Number:

• 4128010-45
• 412801045