Skip to content

Invisible Zipper Foot for Most Husqvarna Viking Sewing Machines

$34.95

Invisible Zipper Foot

An invisible zipper is always inserted before stitching the garments seam. The Invisible Zipper Foot has two grooves underneath the foot to accommodate the zipper coils and hold them in place as you stitch. Buy a zipper that is at least 1 1/4″ (3 cm) longer than the zipper opening.

Use:

  1. ย Mark the length of the zipper opening on the seam allowance and on the zipper. The excess length should be at the bottom of the zipper.

    2. Snap on the Invisible Zipper Foot. Select center needle position straight stitch. Length 2.5 – 3.0.

    3. Unzip the zipper.

    4. Place the right part of the zipper on the fabric right sides together. The coil should be on the seamline and the top stop of the zipper 3/4″ (2 cm) below the cut edge of the fabric. (Illustration A)

    5. Fingerpress up the zipper coils and lower the presser foot with the zipper coils in the right opening under the foot. (Illustration B)

    6. Adjust needle position to align the needle with the needle guide on the front of the foot. Backstitch and sew. Stop at the mark on the zipper and seam allowance and backstitch to tie off. (Illustration C)

    7. Place the left part of the zipper right sides together with the left side of the garment. Lower the presser foot with the left opening over the zipper teeth. Make sure that the needle is perfectly aligned with the needle guide in front of the foot again. Sew in the same way as the first side.

    8. Pull up the zipper pull. Place the fabric with the zipper right sides together. Snap on the regular Zipper Foot to the left of the needle. Adjust needle position to the right. Start stitching in the backstitched seam and sew the seam below the zipper. (Illustration D

    If the zipper is too long, whipstitch across the zipper teeth 1 1/4″ (3 cm) below the inserted zipper length. Cut away excess zipper below the whipstitching.

In stock (can be backordered)

Invisible Zipper Foot

An invisible zipper is always inserted before stitching the garments seam. The Invisible Zipper Foot has two grooves underneath the foot to accommodate the zipper coils and hold them in place as you stitch. Buy a zipper that is at least 1 1/4″ (3 cm) longer than the zipper opening.

Use:

  1. ย Mark the length of the zipper opening on the seam allowance and on the zipper. The excess length should be at the bottom of the zipper.

    2. Snap on the Invisible Zipper Foot. Select center needle position straight stitch. Length 2.5 – 3.0.

    3. Unzip the zipper.

    4. Place the right part of the zipper on the fabric right sides together. The coil should be on the seamline and the top stop of the zipper 3/4″ (2 cm) below the cut edge of the fabric. (Illustration A)

    5. Finger press up the zipper coils and lower the presser foot with the zipper coils in the right opening under the foot. (Illustration B)

    6. Adjust needle position to align the needle with the needle guide on the front of the foot. Backstitch and sew. Stop at the mark on the zipper and seam allowance and backstitch to tie off. (Illustration C)

    7. Place the left part of the zipper right sides together with the left side of the garment. Lower the presser foot with the left opening over the zipper teeth. Make sure that the needle is perfectly aligned with the needle guide in front of the foot again. Sew in the same way as the first side.

    8. Pull up the zipper pull. Place the fabric with the zipper right sides together. Snap on the regular Zipper Foot to the left of the needle. Adjust needle position to the right. Start stitching in the backstitched seam and sew the seam below the zipper. (Illustration D

    If the zipper is too long, whipstitch across the zipper teeth 1 1/4″ (3 cm) below the inserted zipper length. Cut away excess zipper below the whipstitching.

Fits:

Husqvarna Viking

  • #1
  • #1+
  • 100
  • 1010
  • 1030
  • 1040
  • 1050
  • 1070
  • 1070 S
  • 1090
  • 1100
  • 118
  • 120
  • 1200
  • 122
  • 1250
  • 150
  • 180
  • 183
  • 185
  • 190
  • 200
  • 203
  • 205
  • 210
  • 225/215
  • 230
  • 250
  • 3000
  • 3010
  • 310
  • 315
  • 320
  • 3240
  • 325
  • 330
  • 3310
  • 350
  • 360
  • 3610
  • 370
  • 415
  • 425
  • 435
  • 435
  • 500
  • 500
  • 530
  • 535
  • 540
  • 545
  • 550
  • 5610
  • 5710
  • 6000 series
  • 605
  • 610
  • 620
  • 6570
  • 6690
  • 735
  • 755 Quilt
  • 775
  • 90
  • 940
  • 945
  • 95
  • 950
  • 950 E
  • 950 S
  • 960
  • 980
  • 990
  • Angelica
  • Anna
  • Classica 105
  • Daisy 335
  • Designer
  • Designer Diamond
  • Designer I
  • Designer I
  • Designer I ESS
  • Designer I USB
  • Designer II
  • Designer Jade 35
  • Designer Ruby Royale
  • Designer SE
  • Designer SE
  • Designer SE
  • Designer Topaz 20
  • Designer Topaz 30
  • Designer Topaz 50
  • Emerald
  • Emerald 116
  • Emma
  • Facette 500/400
  • Freesia 445
  • Hugin
  • II
  • Interlude 445
  • Iris
  • Jeans
  • Juliet
  • Lena
  • Lily 555
  • Limited Edition
  • Lisa
  • Opal 670
  • Opal 690Q
  • Optima 630
  • Orchidea
  • Oscar
  • Platinum 715
  • Platinum 730
  • Platinum 750 Quilt
  • Platinum 770
  • Platinum 955 E
  • Platinum Plus
  • Prelude 340
  • Prisma 990 S
  • Quilt
  • Quilt Designer
  • Quilt Designer II
  • Quilt Designer II
  • Romeo
  • Rose 600
  • Sapphire 830
  • Sapphire 835
  • Sapphire 850
  • Sapphire 855
  • Sapphire 870
  • Sapphire 875Q
  • Sapphire 930
  • Sapphire 960Q
  • Sarah
  • Scandinavia 100
  • Scandinavia 300
  • Sophia
  • Tribute 145C
  • Tribute 145M
  • Victoria
  • Viva
  • 2000

Part Number:

  • 4126870-45

Discover more from Millard Sewing Center

Subscribe to get the latest posts sent to your email.

Weight 0.1 lbs
Dimensions 1 × 1 × 1 in
Stocking Location

Millard Sewing Center

Brand

Husqvarna Viking

Brand

Husqvarna Viking

Reviews

There are no reviews yet.

Be the first to review “Invisible Zipper Foot for Most Husqvarna Viking Sewing Machines”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.